Description
The MW38 series electromagnets use a unique magnetic circuit structure, which has the characteristics of good heat dissipation, deep magnetic permeability, and the ability to penetrate multiple air gaps. They can be used to lift bars, flat iron, angle steel, etc. that have not been bundled or have only been simply bundled. It can improve the problem of large winding when lifting materials such as small round steel and threaded steel. There are room temperature and high temperature types. Due to the use of two or more linked cranes, the connection between them and the hanging beam often adopts a structure with two or four lifting points.
Working Condition
1. The main basis for selecting electromagnetic suction cups is the material being sucked;
2. When transporting waste steel, it involves the degree of loose stacking, blockiness, material quality, working frequency, and temperature data of the materials;
3. When transporting finished materials, it involves the external dimensions, material degree, material quantity, working frequency, and temperature data of the materials;
4. When the temperature of the transported material is below 100 ℃, a normal temperature suction cup should be selected. When the temperature exceeds 100 ℃, choose a high-temperature resistant suction cup. Please specify when the temperature exceeds 600 ℃;
5. When the duration of power on exceeds 60%, choose high-frequency suction cups;
6. When absorbing materials in water, choose submersible suction cups (diving depth<100m). Due to the similarity between submersible suction cups and room temperature suction cups, please specify when placing an order.
7. Equipment supporting electrical appliances: When using a single suction cup, select rectification control equipment and auxiliary equipment according to the energy consumption power (current); When multiple suction cups are used in combination, the total energy consumption power (current) based on the number of connected units and selection;
8. Select appropriate electromagnetic suction cups based on the difficulty level of the material being sucked and the actual situation, while also considering the changes in the type and chemical properties of each batch of materials, and whether seasonal humidity has an impact on the suction of suction cups during transportation
Features
Adopting a fully sealed structure with good moisture-proof performance;
Through computer optimization design, the structure is reasonable, the weight absorption ratio is high, and the energy consumption is low;
The excitation coil has undergone special process treatment, which improves the electrical and mechanical properties of the coil. The insulation material has a heat resistance level of C and a long service life;
Adopting different structures and parameters for different conditions of the sucked materials can widely meet the needs of users;
The high-temperature electromagnetic suction cup adopts a unique insulation method, which enhances the heat resistance adaptation range of the electromagnetic suction cup;
Easy installation, operation, and maintenance.
Technical Data
| Model | Cold-state Power(KW) | Cold-State Current(A) | Overall Dimension (mm) | Mass(kg) | Capacity of lifting bundled bar | ||||||||
| Material specs | Units | Bundles | |||||||||||
| A | B | C | D | E | F | G | |||||||
| MW38-10095L/1 | 7.9 | 35.9 | 1000 | 950 | 1050 | 500 | 110 | 180 | 30 | 1510 | Length 12m Diameter 400mm Weight 3.5t | 4 | 2 |
| MW38-14095L/1 | 10.9 | 49.5 | 1400 | 1100 | 600 | 110 | 180 | 35 | 2090 | 3 | |||
| MW38-17095L/1 | 13.2 | 60 | 1700 | 1150 | 700 | 110 | 180 | 40 | 2530 | 4 | |||
| MW38-110100L/1 | 8.9 | 40.5 | 1100 | 1000 | 1100 | 500 | 110 | 180 | 35 | 1920 | 3 | 2 | |
| MW38-140100L/1 | 10.5 | 47.7 | 1400 | 1150 | 600 | 110 | 180 | 40 | 2390 | Length 9m Diameter 400mm Weight 4t | 3 | ||
| MW38-170100L/1 | 13.4 | 60.9 | 1700 | 1150 | 700 | 125 | 200 | 45 | 2910 | 4 | |||
| MW38-110110L/1 | 9.1 | 41.4 | 1100 | 1100 | 1150 | 600 | 110 | 180 | 40 | 2350 | 2 | 2 | |
| MW38-140110L/1 | 11.1 | 50.5 | 1400 | 1200 | 600 | 125 | 200 | 45 | 3020 | 3 | |||
| MW38-170110L/1 | 13.5 | 61.4 | 1700 | 1250 | 700 | 125 | 200 | 50 | 3630 | 4 | |||
Spare Parts
Service
1.Providing standardized and specification-compliant products.
2.Providing customized product solutions based on different working conditions, temperature, type, voltage, etc.
1.All products come with an 18-month warranty period.
2.Replacement of damaged components (non-human-induced) is provided during the warranty period.
We offer free technical advice for life to all our customers.
90% of the crane spare parts manufactured in our factory, we are able to supply our customers with the parts they need in the first instance and guarantee their suitability for use.
We provide professional installation teams for customers in need to ensure the safe and effective operation of our products.
We provide over 200 types of cranes and their related products, saving customers’ purchasing time.
