The Use of Lifting Clamp in the Transportation of Steel Plates

In order to standardize the loading and unloading steel plate clamp steel plate action process, so that the loading and unloading operations are carried out safely, loading and unloading yard steel plate lifting clamp operation requirements are as follows:

1. Before operation, someone should be sent to check the integrity of the lifting-related work equipment in the warehouse and replace the equipment that does not meet the safety standards.
2. When workers lift with steel plate lifting clamps, the clamp should be 20%-30% of the full length of the proximal end of the steel plate, and the longitudinal and transverse clamps should be symmetrical; the angle of the steel plate lifting tongs clamp should be in accordance with the manufacturer’s specification of the angular steel pressure plate. In general, the horizontal angle of the rigging should be greater than 60°. The smaller the vertical angle, the better. The cargo should be lifted slowly and run smoothly to avoid swinging and collision.
3. When the lifting operator raises the goods to the stacking hauler card, the goods code will stop when it reaches the drop point of 0.3m, and the code will be dropped slowly and accurately after it is stabilized. The work card should be padded with wooden boards, the support code should be neatly placed on the transportation truck, and there should be positioning hooks at the code. The spacing between boards under the steel plate is not more than 5m, and the interference spacing between boards under the steel plate is not more than 2.5m, and the padding on the boards should be aligned up and down.